Solid Wood Dining Chairs Spec Sheet for Hotels

By JPChairs · 2026-10-16 · Solid Wood Dining Chairs

Written by the JPChairs production team in Foshan. Updated 2026-10-16. Every model referenced below is in current production and can be ordered made-to-spec.

Key takeaways

Solid Wood Dining Chairs suit hotel restaurants and banquet rooms because the kiln-dried hardwood handles daily loading.
Check seat height against table height first — 45–48 cm with a 72–75 cm top.
Factory price moves with frame gauge, finish and upholstery grade, not with the photo.
MOQ can be met by mixing models in one container rather than deepening a single SKU.
Plan a 10% spare inventory: it turns replacements into a same-week task.

1. Seat height and how to match your table

Standard dining seat height is 45–48 cm paired with a 72–75 cm table, leaving roughly 27–30 cm of clearance. For wooden chairs used at counters or bars that figure changes to 65 cm and 75 cm seat heights. Get this wrong and no amount of styling saves the room — clearance is the number guests feel first.

2. Seat depth, width and backrest angle

Seat depth of 40–45 cm suits most adults; deeper seats push shorter guests forward off the backrest. Width of 42–48 cm balances comfort against how many you can fit along a banquette. A 5–8 degree recline is the sweet spot for hotel restaurants and banquet rooms: enough to relax, not so much that guests slide.

3. Weight capacity and testing

Contract seating should be rated well above average body weight because the real load is dynamic — people drop into chairs. Ask for the static load rating on the kiln-dried hardwood and, if the chair stacks, how many units high it can be stacked without deforming. Both numbers belong on the spec sheet you sign off.

4. Stacking, nesting and storage maths

Storage decides whether you can host events. A stackable model at 5–10 units high turns a storage closet into real capacity. Measure your closet height before ordering, then subtract 10 cm for handling clearance — the specification that kills most storage plans is the ceiling, not the chair.

5. How to write the spec into your RFQ

Put six numbers in your request: seat height, seat depth, frame material and gauge, finish type, load rating, and quantity. Suppliers quote faster and you can compare line by line. Vague RFQs get vague quotes, and the difference shows up as a surprise on the invoice.

Specification snapshot

Model	Material	Style	Typical use	Factory price	MOQ
JPS Modern Solid Wooden Designer Chairs Wooden	Solid wood/rattan	Modern	Dining room, Restaurant	$45–$50	6 pcs
JPS Luxury Leather Dining Chairs High-Quality Ve	Ash wood	Modern	Dining room, Restaurant	$0–$0	50 pcs
JPS High Quality Vintage European Style Antique	100% Solid Wood	Modern	Dining room, Restaurant	$58–$58	2 pcs
JPS Nordic Modern Design Red Whiteash Wood	Solid wood	Luxury Modern	Dining room, Restaurant	$75–$75	6 pcs
JPS Wholesale High End Dining Room Furniture	100% Solid Wood	Modern	Dining room, Restaurant	$65–$65	6 pcs
JPS Modern Hotel Dining Room Chairs High	Wood	Modern	Dining room, Restaurant	$60–$60	6 pcs

Models referenced in this article

JPS Modern Solid Wooden Designer Chairs Wooden $45–$50 · MOQ 6 pcs · Solid wood/rattan

JPS Luxury Leather Dining Chairs High-Quality Velvet $0 · MOQ 50 pcs · Ash wood

JPS High Quality Vintage European Style Antique $58 · MOQ 2 pcs · 100% Solid Wood

JPS Nordic Modern Design Red Whiteash Wood $75 · MOQ 6 pcs · Solid wood

JPS Wholesale High End Dining Room Furniture $65 · MOQ 6 pcs · 100% Solid Wood

JPS Modern Hotel Dining Room Chairs High $60 · MOQ 6 pcs · Wood

Key terms used in this guide

solid wood dining chair — a specification buyers compare when sourcing solid wood dining chairs for restaurant dining rooms.
solid wood dining chairs — a specification buyers compare when sourcing solid wood dining chairs for restaurant dining rooms.
wooden restaurant chairs — a specification buyers compare when sourcing solid wood dining chairs for restaurant dining rooms.
oak dining chair — a specification buyers compare when sourcing solid wood dining chairs for restaurant dining rooms.
dimensions — the measurements that decide comfort: 45–48 cm seat height for dining, 65 cm for counters, 75 cm for bars.
seat height — the measurements that decide comfort: 45–48 cm seat height for dining, 65 cm for counters, 75 cm for bars.
dining chair manufacturer — a specification buyers compare when sourcing solid wood dining chairs for restaurant dining rooms.
Foshan furniture factory — the furniture manufacturing cluster in Guangdong, China, where our own workshop and most of the supply chain sit.

Frequently asked questions

What is the MOQ for wooden chairs?

Stocked models start from 2 pieces per model and can be mixed within one container. Made-to-spec runs start higher because the line has to be set up for your finish.

How long does production take?

15–25 days after sample approval for most wooden chairs, plus 3–7 days for sampling and then transit. Custom fabric or colour adds about a week.

Can I get a sample before ordering?

Yes. We ship a single sample for approval; sampling is the step that fixes every later date, so we recommend doing it before locking an opening schedule.

Do you support custom colours and fabrics?

Yes — frame colour, upholstery fabric, seat density and logo application are all available on wooden chairs. Custom work adds roughly 5–10 days.

What seat height works with a standard table?

45–48 cm seat with a 72–75 cm table, leaving 27–30 cm of clearance. Counter and bar heights are 65 cm and 75 cm.

How many chairs stack safely?

Most stackable models in this range stack 5–10 high. Check the spec and subtract 10 cm from your storage height for handling clearance.

Next steps

Browse the full JPChairs catalog, read the Solid Wood Dining Chairs archive, or request a factory quote with your quantity and finish. We answer quote requests within one working day.